在我國,大型無縫哈密地區邁克溝槽管件的生產主要采用四種成型工藝,分別為熱擠壓法、熱紡法、熱推脹法和熱穿孔軋制法。下面將詳細介紹這四種工藝。
1、熱擠壓法。這種方法具有針對性,擠壓前需要對坯料進行預處理。當生產直徑小于100毫米的管件時,設備投入較小,材料浪費較少,技術成熟。但隨著管徑的增大,熱擠壓法需要更大噸位、更高功率的設備,因此控制系統也需要升級 。哈密地區邁克管件
2、熱紡法。該方法將平板毛坯或預成形毛坯固定在旋轉心軸上,通過轉輪對毛坯施加壓力并實現軸向進給。經過一次或多次加工,可產出各種薄壁空心回轉體產品。這種工藝生產的產品精度高、機械性能優良、尺寸范圍廣泛,對工具和模具的要求簡單,更換方便,生產成本相對較低。然而,其缺點是生產時間較長,產量不高,加工管件受設備長度限制,一般尺寸較短。
3、熱推脹法 。這種方法靈活性高,設備要求簡單,成本較低,維護方便,經濟耐用,產品規格轉換便捷。當需要生產大口徑 溝槽管件、彎頭等產品時,只需增加一些配件即可。熱推擴徑法適用于生產中薄壁、厚壁和大直徑無縫鋼管,也可生產不超過設備能力的厚壁管。哈密地區邁克管件
4、熱穿孔軋制法。主要包括縱向軋制延伸和橫向軋制延伸兩種,前者包括限芯棒軋制、少機架限芯棒軋 制、三輥限芯棒軋制和浮動芯棒軋制。這些方法具有生產效率高、金屬消耗低、產品質量好、控制系統先進等優點。后者具有投資少、流程短、適合中小批量、多品種、多規格、高精度生產中厚壁無縫鋼管等優點,因此得到廣泛應用。
以上四種成型方法均應用于無縫哈密地區邁克溝槽管件的生產,希望能幫助大家更好地了解并掌握這一領域。