在進行管道安裝時,我們經常會(huì )使用到彎頭這種關鍵工具,它在水電管道系統中具有改變線路方向的重要功能。拉薩市邁克彎頭在我們的日常生活中主要用于管道和線路的安裝等方面?,F在,邁克管件的小編將帶大家了解一下彎頭的定義和用途。
一、邁克管件彎頭的定義
彎頭是用于改變管路方向的管件。按照角度可分為45°、90°、180°三種常用類型,另外根據工程需求還包含60°等其他非標準角度彎頭。彎頭的材料包括鑄鐵、不銹鋼、合金鋼、可鍛鑄鐵、碳鋼、有色金屬以及塑料等。
其他稱呼:90°彎頭、直角彎、愛而彎、沖壓彎頭、壓制彎頭、機制彎頭、焊接彎頭等。
彎曲半徑小于等于管徑的1.5倍被稱為彎頭,大于管徑的1.5倍則被稱為彎管。
二、邁克管件彎頭的用途
彎頭是一種常用的連接管件,用于連接公稱通徑相同或不同的兩根管子,使管路實現一定角度的轉彎,公稱壓力為1-1.6Mpa。
三、拉薩市邁克管件技術要求
1、由于彎頭主要用于焊接,為提高焊接質量,端部都需車成坡口,保留一定角度和邊,這一要求較為嚴格,邊厚、角度和偏差范圍均有明確規定。彎頭的表面質量和機械性能基本與管子相同。為方便焊接,彎頭與被連接的管子的鋼種應一致。
2、所有彎件都需要經過表面處理,通過噴丸處理將內外表面的氧化鐵皮去除,并涂上防腐漆。這是為了出口需求,同時在國內也是為了便于運輸防止銹蝕氧化。
3、對于小彎頭,如出口需求,需要做木箱包裝,大約1立方米,規定這種箱子中的彎頭數量大約不能超過一噸,允許套裝,即大套小,但總重量一般不可超過1噸。對于大件就需要單個包裝,如24″的就必須單個包裝。另外就是包裝標記,需要注明尺寸、鋼號、批號、廠家商標等信息。
關于彎頭的定義和用途,邁克管件廠家的小編今天就為大家介紹到這里,希望對大家有所幫助。如果還想了解更多信息,歡迎持續關注我們的網站,我們將分享更多優質內容。