在購買管件的過程中,我們通常會(huì )依據自身需求和準則進行篩選。各種型號的管件有著截然不同的檢驗標準,其中,最為嚴格的消防管件標準又有多少人了解呢?今天,綿陽市邁克管件廠家的小編將為大家詳細解讀。
1、管材和管件應進行現場外觀檢查,需滿足以下要求:
(1)表面無裂紋、縮孔、夾渣、折疊和重皮;
(2)螺紋密封面應完好無損、無毛刺;
(3)鍍鋅鋼管內外表面的鍍鋅層不得有脫落、銹蝕等情況;
(4)非金屬密封墊片應質地柔軟、無老化蛻變或分層現象,表面應無折損、皺紋等缺陷;
(5)法蘭密封面應光滑完好,不得有毛刺和徑向溝槽;螺紋法蘭的螺紋應完好、無損傷;邁克管件標準
(6)檢查數量:抽測總數量的10%;
(7)檢查方法:觀察檢查。
2、消防給水管道應選用與管材相適應的管件,消火栓系統的管材、規格、類型、壁厚及工作壓力應符合設計要求和國家現行相關標準的規定;
(1)檢查數量:抽測總數量的10%;
(2)檢查方法:觀察檢查。
3、綿陽市管件的涂漆、防腐及水壓試驗應分別符合國家現行標準《工業金屬管道工程施工及驗收標準》、《工業設備、管道防腐工程施工及驗收標準》、《建筑給水排水及采暖工程施工質量驗收標準》和《給水排水管道工程施工驗收標準》的相關規定;邁克管件質量
(1)檢查數量:抽測總數量的10%;
(2)檢查方法:觀察檢查、實驗檢查。
4、管徑小于或等于100mm的鍍鋅鋼管應采用螺紋或卡套式專用管件連接,套絲扣時損壞的鍍鋅層表面及露出螺紋部分應進行防腐處理;管徑大于100mm的鍍鋅鋼管應采用法蘭或卡套式專用管件連接,鍍鋅鋼管與法蘭的焊接處應進行二次鍍鋅。連接后,管道通水斷面面積不得減小。
(1)檢查數量:抽測總數量的10%;
(2)檢查方法:觀察檢查、實驗檢查。
5、消火栓豎管應安裝可拆卸的連接件。
(1)檢查數量:抽測總數量的10%;
(2)檢查方法:觀察檢查、實驗檢查。
以上便是關于綿陽市消防管件的一些標準,我司邁克管件產品生產均嚴格按照這個標準進行,以期達到國家規定的標準,任何不符合標準的產品都不會(huì )進行銷售。