在邁克管件的采購過程中,明確需求和標準至關重要。不同型號的管件有其獨特的檢驗標準,對于追求卓越品質的您,了解南陽市邁克管件的標準更是必不可少的環節。今天,我們將為您詳細解讀南陽市邁克管件的標準。
一、外觀與材質
管材、管件在現場進行外觀檢查,需滿足以下要求:
無裂紋、縮孔、夾渣、折疊和重皮。南陽市邁克管件
螺紋密封面完好、無損傷、無毛刺。
鍍鋅鋼管內外表面的鍍鋅層無脫落、銹蝕等現象。
非金屬密封墊片質地柔韌、無老化蛻變或分層現象,表面無折損、皺紋等缺陷。
法蘭密封面完好光亮,不得有毛刺及徑向溝槽;螺紋法蘭的螺紋完好、無損傷。
抽測總數量的10%進行查看。
邁克管件需選用與管材相適應的管件,消火栓體系的管材、標準、類型、壁厚以及工作壓力應符合設計要求和國家現行有關標準的規定。抽測總數量的10%進行調查查看。
二、涂漆、防腐與水壓實驗
管件的涂漆、防腐和水壓實驗需符合國家現行標準《工業金屬管道工程施工及查驗標準》、《工業設備、管道防腐蝕工程施工及查驗標準》、《修建給水排水及采暖工程施工質量查驗標準》和《給水排水管道工程施工查驗標準》的有關規定請求。抽測總數量的10%進行調查查看或實驗查看。
管徑小于或等于100mm的鍍鋅鋼管應選用螺紋或卡套式專用管件銜接,邁克管件的套絲扣時損壞的鍍鋅層外表及顯露螺紋有些應做防腐處理;管徑大于100mm的鍍鋅鋼管應選用法蘭或卡套式專用管件銜接,鍍鋅鋼管與法蘭的焊接處應二次鍍鋅。銜接后,管道的通水橫斷面面積不得減小。抽測總數量的10%進行調查查看或實驗查看。
消火栓豎管應安裝可折卸的銜接件。抽測總數量的10%進行調查查看或實驗查看。
南陽市邁克管件始終秉持國家規定的標準進行生產,確保每一件產品都符合質量要求。我們承諾,不符合標準的產品絕對不會(huì )進入銷售環節,為您帶來安全可靠的管件產品是我們的首要任務。