消防噴淋頭集熱罩的用途主要是提高消防噴淋頭的反應速度,因為噴淋頭的動作溫度是在68度以上,要想讓噴淋頭噴水溫度要達到68度以上才能使其爆破噴水,所以發生火災的時候,除非噴淋頭下面有大量的物品燃燒才能使其動作。在消防噴淋頭處增加集熱裝置可聚集噴頭處的熱量,加快反應靈敏度,使噴淋頭提前進行噴水。
發生火災時,物品經過達燒火勢往上竄,室內空間的溫度最高值一般在吊頂和頂板區域,但有些噴淋頭的安裝位置受到限制,不能在火災初期產生的溫度使噴淋頭動作,如果在噴淋頭處增加集熱裝置可提高噴淋頭的響應速度,讓噴頭在起火早期盡快動作。
消防噴淋頭集熱罩可解決噴頭離吊頂距離大導致噴頭反應靈敏度大大降低的效果,有些噴淋頭安裝在梁底位置,達不到噴頭安裝位置離頂板應小于等于15公分的要求,這種情況下,在發生火災時,噴頭處的溫度升高慢,根據消防噴淋系統設計規范必須增加消防噴淋集熱裝置。
一、地下車庫梁下增設的噴頭(當梁的寬度小于0.12的平方根)、網格吊頂且設計為下噴噴頭的地方,需要設置集熱罩。
二、如噴淋頭安裝高度超過5米以上的,需要設置集熱罩。
三、所有達不到到規范要求的地方都應該增加聚熱罩的地方。
四、所有下噴不吊頂的地方都必須安裝集熱罩。